<b id="gjxre"></b>
<wbr id="gjxre"></wbr>
        1. <source id="gjxre"></source>
          <output id="gjxre"></output>
        2. <source id="gjxre"></source>
        3. 18839828187

          CN
          Refractory product series Auxiliary Material Series Feeder Head Product Series Functional Coatings Series Resin Product Series
          Series of phenolic urethane resin

          Exothermic-insulating sleeves are used to increase the yield in foundry practice. Function of the sleeve is predominant to enhance the effective casting modulus by increasing feeding efficiency. This is represented by a modulus extension factor (MEF)

          product details
          • Characteristic

            Phenolic urethane resin comprises three components, first component is phenolic resin, the second component is a poly isocyanate, the third component is catalyst.

            1. Fast solidification speed and uniform solid performance, higher release properties and high temperature strength;

            2. Using time and release time ratio can reach more than 75%;

            3. Does not contain S, P, Small gas flow, lower porosity.

            4. Scattered well, reduce crack defects;

            5. Wide adaptability, can be used in cast iron, cast steel, non-ferrous metals.

          • Using introduction

            If using batch-type mixer, before prepare the mixed material, please pour the catalyst first added to the component 1 and uniformly mixed. Mixed it with the sand for 1 minutes, then add the component 2 and mix for 2 minutes. Then making the core using the mixed sand. If using the continuous mixer, the amount of catalyst components with the proposal to join the 1 resin sand, then adding 2 component resin. Immediately making core or molding after mixed.

            Component 1 and component 2 ratio is generally (50~55%): (50~45%) . The amount of catalyst is 0.5~3% of component 1, and it should be added into the component 1 when using.


          • Resin technology index

            gradeindex

            density(20℃) g/cm3

            viscosity(20℃)≤mPa.s

            Free formaldehyde%≤

            Shelf life(years)

            Scope of application

            YG-RF001

            1.06-1.12

            220

            <0.5

            6 months

            cast iron,cast steel

            YG-RF002

            1.06-1.12

            220

            0

            6 months

            cast iron,cast steel

            YG-RF003

            1.08-1.18

            50

            -

            6 months

            cast iron,cast steel

            YG-RF004

            0.92-1.02

            100

            -

            6 months

            non-ferrous metals

            YG-RF005

            1.05-1.15

            50

            -

            6 months

            non-ferrous metals


            Catalyst technical index

            Brandindex

            XYG1

            XYG2

            XYG3

            XYG4

            XYG5

            viscosity(20℃)≤mPa.s

            10

            10

            10

            10

            10

            Density(20℃) g/cm3

            0.92-1.02

            0.95-1.05

            0.90-1.00

            0.92-1.02

            0.90-1.00

            Scope

            winter≤15℃

            spring and autumn10-25℃

            spring and autumn15-25℃

            spring and autumn20-30℃

            summer>25℃


          • Matters needing attention

            1 This product is stimulating to the eyes and skin. When using, workers should wear good appropriate protective clothing, gloves and protective glasses / mask.

            2 Once the eyes contact with it, please lift the eyelids, wash eyes with the flow of water or saline flush 15 minutes and then go to the doctor.

            3. The product is flammable. It should be stored away from the fire source, to avoid the heat or direct sunlight. If a fire, spray water, foam, CO2 or dry powder to put put the fire..

            4.The product should be stored in a cool, dry place, must be sealed, especially NP102 to prevent water and react.

            5 Be careful when handling.

          Email

          johnli.csm@gmail.com

          Technical advisor

          +86 18239875308

          Sales Manager

          +86 18239875308

          Whatsapp

          +86 18239875308

          WeChat

          +86 18239833671

          Copyright Sanmenxia Sunlight Casting Material Co.,Ltd.

          All Rights Reserved. Designed by Wanhu

          国产女主播精品大秀系列,最新69国产成人精品免费视频,国产无码中文字幕在线,亚洲中文字幕永码永久在线
          <b id="gjxre"></b>
          <wbr id="gjxre"></wbr>
              1. <source id="gjxre"></source>
                <output id="gjxre"></output>
              2. <source id="gjxre"></source>