<b id="gjxre"></b>
<wbr id="gjxre"></wbr>
        1. <source id="gjxre"></source>
          <output id="gjxre"></output>
        2. <source id="gjxre"></source>
        3. 18839828187

          CN
          Refractory product series Auxiliary Material Series Feeder Head Product Series Functional Coatings Series Resin Product Series
          Alkaline phenolic resin &hardener

          product details
          • Alkaline phenolic resin &hardener

            Alkaline phenolic resin &hardener process, also known as α-set process,the appearance of the resin is brownish red liquid, with the following characteristics:

            1 resin does not contain N, curing agent does not contain S, P, to avoid the casting surface produced by the increase of P S, tissue deterioration, nitrogen gas holes and other defects.

            2 good applicability of the original sand. Alkaline phenolic resin applies not only to acid consumption value low quartz sand, zircon sand, South Africa Ge iron ore, is also applicable to  were the sand with higher acid consumption values, chromite sand and magnesium olivine sand.

            3 the hardening system has the properties of thermoplastic and second hardening performance under high temperature, so it can greatly reduce the crack and the burr defect of the cast steel and ductile iron castings.

            4 free formaldehyde content is low, only 0.2%, the use of the curing agent has no peculiar smell, labor hygiene condition is good.

            5 alkaline phenolic resin&hardener  sand with low gas evolution and good collapsibility, reduce cleaning time, improve work efficiency.

            6 the curing performance is good, the molding time can be adjusted, with three types of curing agent, can meet the different seasons of a year on the type (core) sand curing

            7. In Al-Cu alloy castings, casting porosity is reduced; improved air tightness and core collapsibility is good, high dimension accuracy of castings, make the finished product rate is greatly increased.


            Scope of application

            All kinds of alloy steel, carbon steel, high manganese steel, ductile iron, aluminum copper alloy castings


          • performance index

            model

            appearance

            viscosity(25℃)mPa.s

            density(25℃) g/cm3

            Free phenol%≤

            free formaldehyde%≤

            tensile strength(24h)

            compressive strength(24h)

            Alkali phenolic resin

            The red brown viscous liquid

            70-90

            1.2-1.3

            0.5

            0.2

            1.2-1.8Mpa

            3.5-4.5Mpa


            Main technical performance indexes of alkali phenolic curing agent

            model

            appearance

            ester content(%)

            density(g/cm3)

            Stripping time(20℃,min)

            YG-G-01

            Low viscosity liquid

            ≥95

            1.1-1.2

            10

            YG-G-02

            Low viscosity liquid

            ≥95

            1.1-1.2

            20

            YG-G-03

            Low viscosity liquid

            ≥95

            1.1-1.2

            120

            YG-G-04

            Low viscosity liquid

            ≥95

            1.1-1.2

            240


          • Use guide

            1 ratio: resin 1.2~2.0% (accounting for sand weight, curing agent 20~25% (accounting for resin weight)).

            2 sand mixing process: First, the sand and the curing agent are mixed, then add the resin sand mixing time is usually 5~60 seconds.

            3. Sand mixing equipment and process is recommended highly active resin sand mixer, when dosage is small, we should use the gap type bowl resin sand mixed or double stirring sand mixer; when dosage is large, we should with blade type continuous mixer.

          Email

          johnli.csm@gmail.com

          Technical advisor

          +86 18239875308

          Sales Manager

          +86 18239875308

          Whatsapp

          +86 18239875308

          WeChat

          +86 18239833671

          Copyright Sanmenxia Sunlight Casting Material Co.,Ltd.

          All Rights Reserved. Designed by Wanhu

          国产女主播精品大秀系列,最新69国产成人精品免费视频,国产无码中文字幕在线,亚洲中文字幕永码永久在线
          <b id="gjxre"></b>
          <wbr id="gjxre"></wbr>
              1. <source id="gjxre"></source>
                <output id="gjxre"></output>
              2. <source id="gjxre"></source>